Thursday, August 25, 2011

Make Your Own iPod Touch Stylus Pen

Apple describes the multi-touch display on the iPhone and ipod touch as "a panel beneath the screen's glass cover senses your touch utilizing electrical fields [to] transmit that info to an LCD display beneath it." This capacitive technologies (as labeled in an write-up on KongTechnology.com) poses a problem to customers with lengthy fingernails, big fingers or who favor to Apply a stylus. An efficient stylus for such gadgets demands a conductive materials (this kind of as metal) that does not scratch the display.

Issues You will Require

    Metal snap fastener (sewing) Fishing line or dental floss Tremendous glue Ballpoint pen Optional: tape, scissors

    Separate the metal snap fastener and set apart the socket element (with the depression on the encounter and rounded edges).

    Tie a number of knots in the fishing line till a huge knot is created that is bigger than the width of the sewing slot on the socket snap.

    Thread the free end of the fishing line via the front of the socket snap so that the knot catches in the sewing slot.

    Use a dab of superglue to the knot to affix it to the metal fastener.

    Twist the pen to disassemble the spring, ink reservoir and point.

    Insert the free end of the fishing line by means of the ballpoint opening of the bottom pen cap and pull the line via until finally the socket snap reaches the pen suggestion (i.e., end of the cap).

    Drape the free end of fishing line over the aspect of the pen cap and maintain to safe (or tape in point). Trim further line, if sought after.

    Reassemble the pen housing by twisting the bottom cap to the main system.

    Maintain the pen from on the touch display of the ipod Touch with the socket snap touching the display screen as a substitute of your finger.

No comments:

Post a Comment