Repairing your faulty ipod Touch in situation of a damaged digitizer (touch display), headphone jack, connector dock or battery is far much more price-efficient than buying a brand name new component. If your guarantee is expired and your gadget is non-operational, it is really worth the time and energy to try to repair it oneself. Whichever component wants servicing, You are going to want to disassemble the ipod Touch entirely. This kind of methods will supply a guideline for undertaking so.
Points You are going to Want
- ipod Repair Resources ipod Touch Guitar Picks
Get an ipod/iPhone repair kit. This kind of are particular Resources developed especially to open an ipod securely. They can be identified at different on the internet vendors, these kinds of as WeLoveMacs and PDASmart. Alternately, you can Utilize a medium guitar pick and a T5 Torx and T6 Torx wrench.
Insert the nylon situation opening instrument into the corner of the ipod casing in the seam among the silver part and the front. Utilize strain, as if you have been stabbing a potato. You will locate this phase less difficult if you Utilize two guitar picks at two numerous spots. The corner is normally the best spot to penetrate the seam.
Move the instrument or guitar pick along the seam to loosen the clips attaching the two elements of the ipod Touch scenario. When you've gone all the way close to the scenario, the situation need to arrive aside.
Meticulously peel back again all the black electrical tape on the elements. Do not get rid of it entirely; fairly, peel it back again till you have uncovered all the screws in the ipod.
Get rid of all visible screws in the ipod Touch. You can Utilize the T5 or T6 Torx wrench for this.
Gently pry out the battery. Be cautious--the battery is considerably malleable and is glued in spot. Get rid of it gently, shifting along the edges and then relocating in the direction of the middle to stop deforming the battery. When the battery is free, set it apart with out getting rid of the connecting wire.
Utilizing the nylon circumstance opening instrument, lift the plugs attaching the ribbons to the logic board. There are two of these kinds of, one on every end--the black one ends on the bottom end and the brown one ends at the top end.
Pry the metal plate off close to the bottom. This will expose 3 black elements connected to an additional metal piece. Pry this metal piece off. You now have entry to all the within elements of your ipod.
No comments:
Post a Comment